West System Pumps & Tools

West System Epoxy Metering Pumps are calibrated for accurate metering of WEST System Epoxy Resin and Hardener at the proper mix ratio, while eliminating mess and guesswork. WEST System reusable epoxy application tools were chosen with both the end user and the characteristics of epoxy, in mind. When cured, WEST System epoxy sticks tenaciously to most substrates including wood, metal, and fiberglass. However, 105 System epoxies do not adhere easily to smooth, high-density plastics without special preparation such as a flame treatment. This is why we prefer epoxy application tools made out of plastic. The smooth surface coupled with the flexibility of plastic allows you to pop cured epoxy off of the surfaces of these mixing tools so you can use them again and again. The square, beveled end of WEST System reusable mixing sticks will reach into the square corners of the WEST System Mixing Pots for thorough mixing of epoxy and blending of fillers. The opposite end of the each mixing stick is rounded, making it excellent for shaping a clean, 3/8? radius fillets for reinforcing epoxy bonded joints. WEST System poly mixing pots have squared corners to facilitate scraping the sides of the pot with a mixing stick. Simply flexing the WEST System roller pan or plastic spreaders will pop off the cured epoxy. Obviously, WEST System glue brushes and foam roller covers aren?t classified as reusable epoxy application tools, but they are excellent for applying epoxy. The density of the foam roller introduces very few bubbles while rolling epoxy onto a surface.