Fiberglass Supply - Carbon Fiber and Composite Supplies for the 21st Century

 

Join Now
 

Call us at 509-493-3464

Online Shopping Cart

VACUUM BAGGING SUPPLIES

Vacuum Bagging Films & Tubes - Breather - Release Films - Peel Ply - Sealant Tape - Vacuum Infusion Supplies

Flow Media - Vacuum Bagging Fittings & Hose - Vacuum Pumps - Resin Traps - Vacuum Bagging Kits

We stock a wide range of vacuum bagging supplies for veneer, debulking, wet lay-up vacuum bagging, resin infusion, and high temperature prepreg applications. Vacuum bagging is a great way to provide a massive amount of pressure evenly over the entire area of a part using atmospheric pressure.  When compared to using presses or autoclaves vacuum bagging is also an economical and efficient way to apply pressure. If you have a question about vacuum bagging please don't hesitate to call us or send us an e-mail.  If you don't see a particular item you need or want custom sized materials please give us a call.

Vacuum Films - We stock a wide variety of vacuum baggging films in different material types, sizes, and configurations.  Films are available in flat sheet, lay flat tubing, and centerfold sheet.  Tubing is popular for construction methods that require the part to be enveloped by the bag.

Item #

Stretchlon 200 .0015" X 60" Stretch Film is a thin green polyurethane film that has well over 500% elongation.  After it is stretched it will return to approximately 80% of its original size.  Stretchlon 200 Stretch Film is a perfect vacuum bagging film for multiple contour parts.  Little or no pleats (rabbit ears) are needed so even the least experienced bagger can use this product. Recommended for wet layup vacuum bagging polyester, vinylester resins and epoxy systems. Great for debulking. Do not exceed 250 F. (121 C)

Per Yard

 

M13-5737

Stretchlon 200 .0015" X 60" Stretch Film, 70 yard roll (210 feet)

$2.84

Buy Now 

 

Cut per yd. Up to 3 yds., Stretchlon 200 .0015" X 60" Stretch Film

$4.51

Buy Now 

 

Cut per yd. 4 yds. to 15 yds., Stretchlon 200 .0015" X 60" Stretch Film

$3.80

Buy Now 

 

Cut per yd., 16 yds & Up, Stretchlon 200 .0015" X 60" Stretch Film

$3.27

Buy Now 

Item #

Stretchlon 800 .002" X 60" Stretch Film is a thin strong (8000 psi Tensile Strength) orange polyurethane film with over 500% elongation that is recommended for use with polyester, vinylester, and Epoxy resins for vacuum bagging or infusion.  After it is stretched it will return to approximately 80% of its original size.  Stretchlon 800 Stretch Film is a perfect vacuum bagging film for multiple contour parts.  Little or no pleats (rabbit ears) are needed so even the least experienced bagger can use this product.  Do not exceed 400 F. (204 C)

Per Yard

 

M13-5803

Stretchlon 800, 70 yard roll (210 feet)

$3.20

Buy Now 

 

Cut per yd. Up to 3 yds., Stretchlon 800

$5.07

Buy Now 

 

Cut per yd. 4 yds. to 15 yds., Stretchlon 800

$4.26

Buy Now 

 

Cut per yd., 16 yds & Up, Stretchlon 800

$3.66

Buy Now 

Item #

WL 7400 36" Lay Flat Nylon Bagging Tubing, has good elongation and strength and is ideal for room temperature curing epoxies that may have high temperature exotherms. Use for larger sailboards, higher temperature core bagging and for bagging applications that fit.  .002 thickness, 350% elongation to break, Maximum use temperature 400 F. (204 C)

Per Yard

 

M13-7879

WL 7400 36" Lay Flat Nylon Bagging Tubing 1000' Roll (333.34 yards)

$2.28

Buy Now 

 

Cut per yd Up to 3 yd, WL 7400 36" Nylon Bagging Tubing

$3.95

Buy Now 

 

Cut per yd Up to 15 yd, WL 7400 36"  Nylon Bagging Tubing

$3.02

Buy Now 

 

Cut per yd, 16 yd & Up, WL 7400 36” Nylon Bagging Tubing

$2.61

Buy Now 

Item #

WL7400 120in. Wide Center Fold Nylon Bagging Film 1000' Roll Specs are the same as above, max use temp 400F.  120” wide, with center fold, comes on 60” tube.

Per Yard

 

M13-7885

Full roll, priced by yard.

$3.70

Buy Now 

 

Cut per yd. Up to 3 yd.

$6.48

Buy Now 

 

Cut per yd. 4 to 15 yd.

$4.93

Buy Now 

 

Cut per yd. 16 to 322 yd

$4.26

Buy Now 

Item #

Poly-Tube 4 mil. X 32" Lay Flat Tubing is a light weight polyethylene tubing suitable for vacuum bagging easily conformable core materials to surfboard and sailboard blanks in sandwich construction.  An economical alternative for any room temperature cure core bagging applications that fit.

Per Yard

 

M13-6451

Roll, Poly-Tube 4, 32" Tubing, 1075 ft. (358.34 Yards)

$1.01

Buy Now 

 

Cut per yd. Up to 3 yds., Poly-Tube 4, 32" Tubing

$1.69

Buy Now 

 

Cut per yd. 4 yds. to 15 yds., Poly-Tube 4, 32" Tubing

$1.31

Buy Now 

 

Cut per yd., 16 yds & Up,  Poly-Tube 4, 32" Tubing

$1.09

Buy Now 

Item #

Poly-Tube 6 mil. X 30” Lay Flat Tubing, is a heavier polyethylene tubing suitable for vacuuming stiffer core materials to surfboard and sailboard blanks in sandwich construction.  An economical alternative for any room temperature cure core bagging applications that fit.

Per Yard

 

M13-7165

Roll Poly-Tube 6, 30" Tubing, 500 ft. (166.67 Yards)

$1.98

Buy Now 

 

Cut per yd. Up to 3 yds., Poly-Tube 6, 30" Tubing

$3.34

Buy Now 

 

Cut per yd. 4 yds. to 15 yds., Poly-Tube 6, 30" Tubing

$2.56

Buy Now 

 

Cut per yd., 16 yds & Up,  Poly-Tube 6, 30" Tubing

$2.16

Buy Now 

Breather Fabrics for Vacuum Bagging

Item #

Econoweave 44 Breather 60" is intended for low stress applications.  Econoweave 44 Breather is made of recycled non-woven polyester for ambient or oven cures.  This breather is inexpensive since it is not made to "advanced composite" Q. C. Standards, some imperfections may show on the roll.  It is light weight and very drapable, conforming easily to contour shapes.  Econoweave 44 Breather is an excellent alternative for non-autoclave breathing applications.  Weight 4 oz./yd..  Maximum Temperature use 375 F. (190 C)

Per Yard

 

M08-3595

Econoweave 44 Breather 4 oz. X 60", 100 Yard Roll

$1.95

Buy Now 

 

Cut per yd. Up to 3 yds., Econoweave 44 Breather 4 oz. X 60"

$3.58

Buy Now 

 

Cut per yd. 4 yds. to 15 yds., Econoweave 44 Breather 4 oz. X 60"

$2.80

Buy Now 

 

Cut per yd., 16 yds & Up, Econoweave 44 Breather 4 oz. X 60"

$2.53

Buy Now 

Perforated and Non Perforated Release Films for Vacuum Bagging

Item #

Release Bag-125, .001" X 60" Release Film is an economical release bag that can be used for cures up to 285 F. (141 C) and will release from most resins associated with aerospace, marine, and recreational products.  This formulation has improved tear resistance and elongation over products previously offered as low temperature , multiple process films.    Release Bag-125 Release Film is the ideal release film for polyester, vinyl ester and epoxies.

Per Yard

 

M13-4309

Release Bag-125, .001" X 60" Release Film, 70 yard roll (210 feet)

$1.11

Buy Now 

 

Cut per yd. Up to 3 yds., Release Bag-125, .001" X 60" Release Film

$1.82

Buy Now 

 

Cut per yd. 4 yd. to 15 yd., Release Bag-125, .001" X 60" Release Film

$1.53

Buy Now 

 

Cut per yd., 16 yds & Up,  Release Bag-125, .001" X 60" Release Film

$1.32

Buy Now 

Item #

WL5200 Fluorocarbon is a premier fluorocarbon release film designed to take temperatures up to 500F and maintain its strength and elongation properties.  Compatible with most resin system it is a more flexible and higher stretch film than the RB125.  Has excellent release properties and will leave a glossier finish than other release films.

Per Yard

 

M13-5050

WL5200 Flourocarbon Perf Release film 200 yds  001" X 45"

$7.69

Buy Now 

 

Cut per yd. Up to 3 yd., Perforated WL5200, 001" X 45"

$12.21

Buy Now 

 

Cut per yd. 4 yd. to 15 yd., Perforated WL5200, 001" X 45"

$10.26

Buy Now 

 

Cut per yd. 16yds and up, Perforated WL5200 , 001" X 45"

$8.91

Buy Now 

Item #

Perforated Release Bag-125, .001" X 60" Release Film has .015 diameter holes staggered on 1/4" centers. About 3 to 5 % resin loss.

Per Yard

 

M13-5023

Perforated Release Bag-125, .001" X 60" Release Film, 70 Yard Roll (210ft)

$2.10

Buy Now 

 

Cut per yd. Up to 3 yd., Perforated RB-125, .001" X 60"

$2.94

Buy Now 

 

Cut per yd. 4 yd. to 15 yd., Perforated RB-125, .001" X 60"

$2.54

Buy Now 

 

 Cut per yd. 16  yds and up, Perforated RB-125, .001" X 60"

$2.22

Buy Now 

Peel Ply for Vacuum Bagging

 #

Econo-Ply J 1.6 oz. X 60" is a peel ply designed for low temperature commercial applications where cost savings is the primary concern. Econo-Ply J works well with most room temperature and low temperature curing resins and is easily suited to marine, transportation, recreation and wind power industries.   1.6 oz./yd. (55 g/m) Thickness .003 in. (.008 cm)  Maximum Service temperature 250 F. (121 C)

 Per Yard

 

M05-0739

Econo-Ply J, 1.6 oz. X 60" Peel Ply, 100 Yard Roll.

$2.47

Buy Now 

 

Cut per yd. Up to 3 yds., Econo-Ply J, 1.6 oz. X 60" Peel Ply

$4.26

Buy Now 

 

Cut per yd. 4 yds. to 15 yds., Econo-Ply J, 1.6 oz. X 60" Peel Ply

$3.50

Buy Now 

 

Cut per yd., 16 yds. & Up, Econo-Ply J, 1.6 oz .X 60" Peel Ply

$2.99

Buy Now 

Item #

Econo-Ply E, 2.74 oz. X 60" is a heavy duty polyester peel ply designed for use in "Resin Rich" conditions or where a more textured surface is required for secondary bonding.  Designed for less critical applications.  Econo-Ply E is heat set and scoured polyester and will provide cost savings performance for room temperature and low temperature applications.  Econo-Ply E is easily suited to marine, transportation, recreation and wind power industries.  2.74 oz./yd.  Thickness .0055 in.  Maximum Service temperature 300 F. (149 C)

Per Yard

 

M05-1453

Econo-Ply E, 2.74 oz. X 60" Peel Ply, 250 Yard Roll.

$2.98

Buy Now 

 

Cut per yd. Up to 3 yds., Econo-Ply E, 2.74 oz. X 60" Peel Ply

$4.73

Buy Now 

 

Cut per yd. 4 yds. to 15 yds., Econo-Ply E, 2.74 oz. X 60" Peel Ply

$3.98

Buy Now 

 

Cut per yd., 16 yds & Up, Econo-Ply E, 2.74 oz. X 60" Peel Ply

$3.45

Buy Now 

 

 

 

 

M05-1475

Econo Stitch, 2.6 oz. X 60" Peel Ply with red tracers, 250 Yard Roll.

$3.67

Buy Now 

 

Cut per yd. Up to 3 yds. Econo Stitch

$5.81

Buy Now 

 

Cut per yd. 4 yds. to 15 yds. Econo Stitch

$4.89

Buy Now 

 

Cut per yd., 16 yds & Up, Econo Stitch

$4.24

Buy Now 

 

 

 

 

Item #

Nylon Release Ply 1.90z. X 60" is a nylon release peel ply designed for vacuum bag lay-up and metal to metal bonding structures.  Nylon Release Ply is a tough, economical, tightly woven nylon fabric that is specially coated so polyester and epoxy resins will not bond to it.  Not recommended for phenolic systems.  Nylon Release Ply fabric leaves a fine surface impression for priming and secondary bonding. 1.9 oz./yd.  Thickness .005 in.  Maximum Service temperature 480 F. (249 C)

Per Yard

 

M05-2881

Ny-Ply 19 X 60" 1.9 oz. Peel Ply, 300 Yard Roll

$5.58

Buy Now 

 

Cut per yd. Up to 3 yds., Ny-Ply 19 X 60" 1.9 oz. Peel Ply

$8.26

Buy Now 

 

Cut per yd. Up to 15 yds., Ny-Ply 19 X 60" 1.9 oz. Peel Ply

$7.28

Buy Now 

 

Cut per yd., 16 yds & Up, Ny-Ply 19 X 60" 1.9 oz. Peel Ply

$6.50

Buy Now 

 Item #

Bleeder Lease B X 60"Bleeder Lease B is a fully cured silicone coated peel ply.  The silicone coating allows the peel ply to release from the laminate with much less effort than an uncoated peel ply.  Use in areas where you are having problems getting off peel ply, such as under feed lines or under flow media.  Bleeder lease B is a 1.83oz/sq. yd. nylon fabric, approx. .0045” thick with a max service temperature of 450F.

 Per Yard

 

M05-1620

Bleeder Lease B X 60" Peel Ply, 100 Yard Roll.

$7.18

Buy Now  

 

Cut per yd. Up to 3 yds., Bleeder Lease B  X 60" Peel Ply

$11.39

Buy Now  

 

Cut per yd. 4 yds. to 15 yds., Bleeder Lease B  X 60" Peel Ply

$9.58

Buy Now  

 

Cut per yd., 16 yds. & Up, Bleeder Lease B X 60" Peel Ply

$8.32

Buy Now  


Sealant Tape for Vacuum Bagging

IMG_5271_edited1

Item #

AT-199 Sealant Tape is designed for applications where cost is the primary consideration.  Use longer 50 foot roll to seal vacuum bag to mold, around entry points into bag and for repairing leaks in bag. this tape has been reduced, 1/16" thickness and 1/4" width, yet still provides a good vacuum seal for debulking and oven cures to 250 F. (121 C)   1/16" X 1/4" X 50'  Color Black.

 Each

 

M20-8593

Roll, AT-199 Sealant Tape (50 feet per roll)

$8.17

Buy Now 

 

Sleeve (10 rolls), AT-199 Sealant Tape, Per Roll

$6.84

Buy Now 

 

Case (40 rolls), AT-199 Sealant Tape, Per Roll

$6.40

Buy Now 

IMG_5275_edited

Item #

G-121 Sealant Tape, a 1/8' x 1/2" room temperature mastic sealant used to seal vacuum bag to mold, around entry points into bag and for repairing leaks in bag.  Maximum Service temperature 250 F. (121 C)  1/8" X 1/2" X 25'  Gray color.

 Each

 

M20-8712

Roll, G-121 Sealant Tape (25 feet per roll)

$8.83

Buy Now 

 

Sleeve (10 rolls), G-121 Sealant Tape, Per Roll

$7.66

Buy Now 

 

Case (40 rolls), G-121 Sealant Tape, Per Roll

$5.56

Buy Now 

IMG_5270_edited1

Item #

AT-200Y Sealant Tape is produced in standard width and thickness along with high tack.  This provides greater surface area to hold the vacuum bag.  AT-200Y provides a good vacuum seal between the bag and tool, coming off clean when removed.  Maximum Service temperature 400 F. (204 C) 1/8" X 1/2" X 25'   Yellow color. 

 Each

 

M20-8731

Roll Y-204 Sealant Tape,  (25 foot roll)

$8.52

Buy Now 

 

Sleeve (10 rolls), Y-204 Sealant Tape, Per Roll

$7.23

Buy Now 

 

Case (40 rolls), Y-204 Sealant Tape, Per Roll

$4.97

Buy Now 

 

2 + Cases (80 + rolls)

$4.72

 

Vacuum Infusion Supplies, Vacuum infusion is quickly becoming the leading way to get high quality parts with prepreg-like quality using low cost tooling.  We have added some infusion specific parts for this, including flow medium and spiral wrap.  For infusion with styrenated resins we recommend using Stretchlon 800 as the bagging film. 

IMG_5247_edited1
IMG_5245_edited

Item #

Spiral Wrap, used in infusion for the perimeter vacuum line and for the resin inflow.  Use T-fittings to splice into wrap with hoses.

 Per Foot

 

M50-0010

1/2" Diameter Infusion Spiral Wrap Roll, Per Foot, 100ft Roll

$0.53

Buy Now 

Per Foot, Cut up to 9 feet

$0.77

Buy Now 

Per Foot, Cut 10 to 45 feet

$0.65

Buy Now 

Per Foot, Cut 46 feet and up

$0.57

Buy Now 

 

 

 

 

Item #

 

Each

 

M50-0020

Polyethylene T Fittings for 1/2" Spiral Wrap, EA

$1.35

Buy Now 

Polyethylene T Fittings For 1/2" Spiral Wrap, 15 and up, Each

$1.19

Buy Now 

 

 

 

 

M50-0050

PE Tubing 1/2" x 100'

$0.45

Buy Now 

 

Per Foot, Cut up to 9 feet

$0.66

Buy Now 

 

Per Foot, Cut 10 to 45 feet

$0.56

Buy Now 

 

Per Foot, Cut 46 feet and up

$0.49

Buy Now 

 

 

 

 

 

Resin Infusion Connector, Allows you to easily attatch a 1/2” hose to a vacuum bag. The connector is made from solid polyethylene and features a tapered foot that is cut away to bridge 1/2” spiral wrap when used as a vacuum manifold or resin inlet. The connector can be waxed so that resin does not stick to it and used over and over.

 

 

M50-0312

Per Piece, (up to 5)

$8.64

Buy Now 

 

Per Piece, (6-19 )

$8.10

Buy Now 

 

Per Piece, (20-49)

$7.16

Buy Now 

 

Per Piece, (50+)

$6.30

Buy Now 

 

 

 

 

Flow Media

IMG_5253

Item #

Resinflow 75, a resin flow medium that can be used between layers of laminate or on top of peel ply to assist resin flow through the laminate.  Resinflow 75 is a green mesh like material made from a LDPE/HDPE blend.

Per Yard

 

M50-0175

Resinflow 75 Infusion Media x 41", 116 yd roll, Per Yard

$3.14

Buy Now 

Cut per Yard, up to 3 yards

$5.14

Buy Now 

Cut per Yard, 4 to 15 yards

$4.24

Buy Now 

Cut per Yard, 16 yards and up

$3.59

Buy Now 

M50-0225

Enkafusion CX1000 4mm x 4in wide , Flow media, generally used for inlet lines when doing resin infusion.

$0.59

Buy Now 

 

Per Foot, Cut up to 9 feet

$0.99

Buy Now 

 

Per Foot, Cut 10 to 45 feet

$0.80

Buy Now 

 

Per Foot, Cut 46 feet and up

$0.67

Buy Now 

 

 

 

 

Fittings and Hoses for Vacuum Bagging

IMG_5262_edited

Item #

0-30HG Vacuum Gage for determining how much vacuum pressure is under your vacuum bag.    1/8" NPT male thread fitting.

 Each

 

M43-0973

0-30HG Vacuum Gage (885-5)

$26.47

Buy Now 

IMG_5865_edited1
IMG_5868_edited1

Item #

Description

Each

 

M50-0413

Barbed fitting 3/8" ID Hose x 1/4" Male NPT

$6.56

Buy Now 

M50-0425

Barbed fitting 3/8" ID Hose x 1/4" Female NPT

$7.92

Buy Now 

M50-0460

1/2" FIP x 1/4" FIP to connect 15400 and15600 vacuum pumps to 1/4" Male NTP fittings.

$10.46

Buy Now 

 

 

 

 

Item #

401C Twist Lock Aluminum Vacuum Cup Assembly is an economical cast aluminum 2 piece vacuum fitting, providing a connection between the vacuum bag and the vacuum source.  Use with the AF-2 Quick Disconnect and AF-3 Vacuum Hose.  This simple valve has 2 silicone rubber gaskets to help make the vacuum seal.  After cutting a hole in the bag, slip the bottom through and secure the top. 1/4" NPT male thread fitting, 2 1/2 inch base diameter.  Maximum Temperature Use 500 F. (260 C)

 Each

 

M45-1687

401C Twist Lock Aluminum Vacuum Cup Assembly

$22.33

Buy Now 

 

5 & Up, 401C Twist Lock Aluminum Vacuum Cup Assembly

$20.98

Buy Now 

IMG_5257_edited

Item #

AQD 500 TF Quick Disconnect Assembly are made of high carbon steel that has been coated to halt oxidation.  Each one has high temperature Vinton O-rings that withstand continuous use up to  500 F. (260 C).  The internal springs are corrosion resistant and of the highest quality materials available.  Epoxies do not attack the Vinton O-rings. 1/4" NPT female thread fitting.

 Each

 

M45-1806

AQD 500 TF Quick Disconnect Assembly

$32.90

Buy Now 

 

5 & Up, AQD 500 TF Quick Disconnect Assembly

$31.10

Buy Now 

M45-1802

AQD 500 TF Male End Olnly

$14.00

Buy Now 

 

5 & Up, AQD 500 TF Male End

$13.23

Buy Now 

M45-1804

AQD 500 TF Female End Olnly

$23.62

Buy Now 

 

5 & Up, AQD 500 TF Female End

$22.32

Buy Now 

Item #

Econoflow 59R Vacuum Hose for non-autoclave commercial composite applications.  Econoflow 59R Vacuum Hose is a vacuum hose designed for marine, transportation recreational and other FRP industries where cost cutting is a primary concern.  Econoflow 59R Vacuum Hose can be used for low temperature oven or room temperature cure and has an interlocking steel tube to prevent collapse while remaining flexible.  The rubber jack protects the vacuum bag.  Bell shaped ferrules prevent hose lacerations at the fitting ends, extending hose life. 10 foot length with 1/4" NPT male threaded end fitting. Inside hose diameter 3/8" X outside hose diameter 1 3/4". Maximum Temperature use 275 F. (135 C).  Other lengths available by special order.

 Each

 

M45-1925

10 ft. Length Econoflow 59R Vacuum Hose

$71.75

Buy Now 

 

5 & Up, 10 ft. Length Econoflow 59R Vacuum Hose B9

$67.76

Buy Now 

Vacuum Pumps and Vacuum Generators for Vacuum Bagging Composites

Vacuum_Pumps

Our vacuum pumps are an economical choice for light to medium duty composite vacuum bagging applications including resin infusion.  They are 2 stage rotary vane pumps that operate on 120V.  They are also suitable for other vacuum bag laminating and clamping techniques such as cold molding and vacuum laminating wood veneers.  All pumps have a 1 year warranty.

Item #

Description

Price

Unit

 

M60-1515

1.5 CFM Vacuum Pump, 1/4hp, 50 microns, 2 stage rotary vane pump, 110V.

$193.19

Ea

Buy Now 

M60-1540

4 CFM Vacuum Pump, 1/3hp, 20 microns, 2 stage rotary vane pump, 115V.

$440.28

Ea

Buy Now 

M60-1560

6 CFM Vacuum Pump, 1/2hp, 20 microns, 2 stage rotary vane pump, 115V.

$452.61

Ea

Buy Now 

M60-2100

Quart, Vacuum Pump Oil

$9.72

Quart

Buy Now 

M60-0002

Vacuum  Oil Drain Kit for 15400

$12.50

Ea

Buy Now 

M60-0005

Vacuum Seal Replacement for 15400

$75.89

Ea

Buy Now 

 

 

 

 

 

Item #

Venturi Vacuum Generator with Silencer, develops over 20 Hg (mercury) of vacuum (10 psi) at 1 SCFM.   Designed to run off of conventional shop air compressor delivering at least 60 psi at 2 SCFM.  Use with vacuum cups and vacuum tubing for an economical vacuum bagging setup.

 Each

 

M43-0497

Venturi Vacuum Generator (885-6)

$121.98

Buy Now 

Resin Traps or Catch Pots for Vacuum Bagging

IMG_5878_edited
Resin Trap Group

Item #

Description

Each

 

M60-2910

FS Resin Trap, one quart

$115.26

Buy Now 

M60-3000

Medium Resin Trap 2.3 Quart

$143.42

Buy Now  

M60-3020

Large Resin Trap or Degassing Chamber 1.7 gallon

$195.53

Buy Now  

M60-3025

Airtech Resin Trap, 2.5 Gallon, with vacuum regulator

$481.93

Buy Now 

Vacuum Bagging Kits

Item #

Description

Each

 

M70-1010

Basic Vacuum Bagging Kit- Includes 3 yards of Econoply E Peel Ply, 3 yards of 60” Breather, 3 yards of Perforated Release Bag RB125, 3 yards of Stretchlon 800, and 1 roll of AT199 Sealant Tape

$42.48

Buy Now 

Prices Subject to change without notice.

 Prices updated on June 08, 2016

For the most up to date pricing and to order online please go to our online shopping cart.


Sign up for our Newsletter!
Email:  
For Email Marketing you can trust
 

Home
Product Catalog
About Fiberglass Supply
News and Events
 

Terms and Conditions
MSDS
How To and Tech Help
Services
 

Fiberglass Supply 
 11824 Water Tank Rd. Burlington
 Washington, 98233 USA
Phone; (509) 493-3464
Fax(360)757-8284
 e-mail support@fiberglasssupply.com