FCS

FCS SUP Handle with Gore Vent Screw

FCS II Router Template Jig. Use with the FCS Fusion router bit to route fin box holes for the FCS II system.

FCS II Side plug 3 degree fin boxes.  This is a pair, includes 2 fin boxes. Use FCS II router template jig and Fusion router bit to install. *Available in the Color BLACK

Pair of FCS II side plugs with 5 degree cant.  Use the FCSII router template to install with the Fusion bit. *Available in the Color Black

FCS II performer tri fin set.  Size small, base 4.25", height 4.43", fin area 14.03 sq. in.

FCS II Performer Tri Fin Set, size Medium.  Fin base 4.37", height 4.55", area 14.81 sq. in.

FCS II Carver tri fin set, size medium.  Fin base 4.47", height 4.58, fin area 15.28 sq. in.

FCS II Carver tri fins, large.  Fin base 4.58", fin height 4.66", fin area 15.73 sq. in.

FCS II Carver rear quad set (2 fins) size medium.  Fin base 4.14", fin height 4.21", fin area 12.63 sq. in.

Hole saw drill for installing or removing original style FCS fin plugs. Features stop collar for drilling to correct depth and pilot bit with a sharply pointed tip to reduce the chance of drill walk.

FCS Fusion Router Bit, use with FCS Fusion Router Jig Template or FCS II Router Jig Template for installing FCS Fusion boxes or FCS II boxes.

FCS Fusion Router Jig base plate.  Use with the Fusion router bit to route fin box holes for the FCS Fusion fin box system.  

FCS Leash cup, pre-glass install leash cup.  Simply drill a 1" hole with a 1" forstner style bit in the blank and set with some resin to glue the leash cup in place then glass over it. Sand over...

Stainless Steel FCS Fin Screw Use on FCS fin plugs only. NOT COMPATIBLE WITH OTHER BRAND FIN BOXES

FCS Fusion Center Box.  Center box has no cant and the fin screws are on opposing sides.  

FCS Fusion 9 deg. Side Box for thruster fin setups, quads, or longboard side fins.  Price is for 1 fin box.  Fin box features a 9 degree cant.

FCS Fusion 5 deg. Side Box for side bites, thrusters, and quad fin setups.  Box features a 5 degree cant.  Price is for 1 FCS Fusion fin box.

FCS Center Plug. Used to install FCS fins on surfboards or paddleboards and for replacing or repairing damage fin plugs. The center plug can also be used to mount GoPro cameras. Center plugs have no...

FCS Rail Plug, to install FCS fins or repair/replace damage fin boxes. For mounting GoPro cameras use the FCS center plug.   Rail plugs have a 4 degree cant built into them.  Plugs sold...

The FCS Marking out Template is a jig for marking out where to drill the holes to install the FCS fin plugs.  Thin plastic template with cutouts to mark onto the board where the fin plugs go...

FCS Oversized Allen Keys Use to remove stripped fin screws from plugs.

M3 Tri Fins only Glass Flex Moulded composite fin with engineered flex and tip response. Base 4.28" Depth: 4.41" Area:14.22 sq. In Sweep: 31 degrees

M3 Tri fin set Natural w/ plug

M5 Tri fins only Glass Flex

M5 Tri fin set in Glass Flex w/ Plugs.  FCS M5 fin is a popular medium size thruster fin set.  Includes 4 rail plugs and 2 center plugs.   Fin Base 4.37" Depth 4.55" Area: 14.76 sq. in.

FCS M7 Tri Fins Only GlassFlex.     Base: 4.52 in Depth: 4.67 in  Area: 15.71 sq. in. Sweep: 33 degrees

FCS GL Twin Fins Only Glass Flex.     Base: 3.4" Depth: 3.61"  

FCS GL Side Bites (pair) in Glass Flex with Fin Plugs.  Includes 4 side plugs.   Fin Base 3.4" Fin Depth 3.61"

FCS GX Twin Fins Only Glass Flex.   Fin Base 3.86" Fin Depth  3.9"

FCS GX L/B Side Fin Set in Glass Flex with Fin Plugs. Includes 4 FCS rail plugs   Fin Base 3.86" Fin Depth  3.9"

FCS ALL TECH PUTTY, 2 part epoxy putty that is easy to use, simply cut off the amount you need, knead to mix the 2 components and form into the ding you need to fix.  Can be sanded after it...

FCS 10' SUP Big Wave ankle leash, coiled for reduced drag in the water.  

FCS SUP RACE ADJUSTABLE ANKLE LEASH