WEST SYSTEM® Pigments
WEST SYSTEM® Pigments are available in three colors, white, black and gray. The pigments are suspended in an epoxy resin base which allows them to blend thoroughly into the epoxy to make very uniform colors. Adding WEST SYSTEM pigment to epoxy should, like everything in life, be done in moderation. Without exception, adding pigment to WEST SYSTEM Epoxy will weaken the cured physical properties to some small degree. Because of this, we suggest you use very small amounts of pigment, about 5% by weight. As a result, thin films of colored epoxy are somewhat transparent. It usually requires several coats to make the film opaque. Powdered epoxy additives also change the color of epoxy. 423 Graphite Powder makes epoxy black; 420 Aluminum Powder makes epoxy gray.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
WEST SYSTEM® 501 White Pigment, 4oz
WEST SYSTEM®
$25.90501 White Pigment is an epoxy-based liquid colorant used to tint the epoxy mixture white, providing an even white color base for the final finish system. Colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are...G73-7301$25.90 -
WEST SYSTEM® 502 Black Pigment, 4oz
WEST SYSTEM®
$25.90502 Black Pigment is an epoxy-based liquid colorant used to tint the epoxy mixture black, providing an even, black color base for the final finish system. Colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces...G73-7318$25.90 -
WEST SYSTEM® 503 Gray Pigment, 4oz
WEST SYSTEM®
$25.90503 Gray Pigment is an epoxy-based liquid colorant used to tint the epoxy mixture gray, providing an even, gray color base for the final finish system. Colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are...G73-7335$25.90