PRO-SET® High-Temp and Tooling Epoxies

PRO-SET® High-Temperature Epoxies are a system of 2-part, high-performance epoxies for synthetic composite tooling and part manufacturing. The High-Temperature system consists of a Surface Coat Epoxy, Laminating Epoxy, and an Infusion Epoxy. High-Temperature Epoxy systems can be used with PRO-SET Low-Density Fairing Putty for surfacing molds and plugs. The state-of-the-art chemistry behind these epoxies makes them easy to use, saving on labor and yielding high-quality results. They blend quickly, spread easily and shrink minimally. When combined to manufacture composite parts, they can be demolded after 24-48 hours at room temperature before a freestanding post-cure.

The Tg of this system is as high as 300°F (149°C) with proper post-cure. It has excellent temperature stability and part cosmetics.

High-Temp Infusion Resin

• HTP-180 High-Temp Infusion Resin (Elevated Cure)

High-Temp Infusion Hardener

• HTP-280 High-Temp Infusion Hardener

High-Temp Laminating Resin

• HTP-182 High-Temp Laminating Resin

High-Temp Laminating Hardener

• HTP-284 High Temp Laminating Fast Hardener
• HTP-286 High Temp Laminating Slow Hardener

High-Temp Surface Coat Resin

• HTP-187 High-Temp Surface Coat Resin

High-Temp Surface Coat Hardener

• HTP-288 High Temp Surface Coat Hardener

Data Sheets are available upon Request.