Vacuum Bagging Supplies

Vacuum Bagging Supplies

We stock a variety of vacuum bagging process materials for a wide range of applications from clamping, wet lay-up vacuum bagging, resin infusion, VARTM, and pre-preg applications.  

Most of the vacuum bagging materials in the catalog have their specifications listed in the product page, including suitable applications, product service temperature, compatible materials.  If you are uncertain which material would be a good fit for your application please feel free to contact us.

Fiberglass Supply has been an Airtech International distributor since 2002.  We carry a variety of Airtech vacuum bagging materials, process materials, and plumbing components in stock.  If you need an Airtech product that you do not see in the catalog please contact us, should your volume warrant we would love to bring in and stock that material for you.

For more information contact us HERE
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Pro-Vac Vacuum Bagging Film Pro-Vac Vacuum Bagging Film

    Pro-Vac Vacuum Bagging Film

    PRO-VAC

    $3.60
    Vacuum bag film suitable for applications up to 350F.  Compatible with polyester, vinyl ester, and epoxy resins.  60" wide. Sold by the lineal yard and shipped on a roll unless otherwise requested.
    $3.60
    Qty in Cart: 0
    Quantity:
    Price:
    $3.60
    Subtotal:
  • ProVac Peel Ply

    Pro-Vac Polyester Peel Ply

    PRO-VAC

    $5.31
    ProVac Polyester Peel Ply 60" wide, sold by the lineal yard Has red tracers running the length of it every inch to indicate if it is still on the part or not.  
    $5.31
    Qty in Cart: 0
    Quantity:
    Price:
    $5.31
    Subtotal:
  • Airtech Resinflow 60 red flow flow media Airtech Resinflow 60 being used in a part

    Resinflow 60 Red Flow Media

    AIRTECH

    $9.66
    Airtech Resinflow 60 is a thermoplastic mesh flow media used in vacuum infusion. Often referred to as red flow or red flow media, red flow is 60" wide. Sold by the linear yard. Full rolls are approx. 117 yards. Red flow media flows resin slower than...
    $9.66
    Qty in Cart: 0
    Quantity:
    Price:
    $9.66
    Subtotal:
  • Econo-Ply J, 1.6 oz.X 60in.  Peel ply

    Econo-Ply J, 1.6 oz.X 60in. Peel ply

    AIRTECH

    $5.53
    Econo ply J is our lightest and least expensive peel ply.  Use in areas were there will be little resin build up on top of peel ply.  Econoply J is made with a polyester yarn and is suitable for temperatures up to 250F. Full rolls are 100 yards...
    $5.53
    Qty in Cart: 0
    Quantity:
    Price:
    $5.53
    Subtotal:
  • Econo-Ply E, 2.74 oz. X 60in. Peel Ply

    Econo-Ply E, 2.74 oz. X 60in. Peel Ply

    AIRTECH

    $8.38
    Econo-Ply E, 2.74 oz. X 60in. wide peel ply is our most popular peel ply.  Econoply E is economical as well as being tough to not tear when removing from parts.  Econoply E is made from an uncoated polyester yarn and is suitable for...
    $8.38
    Qty in Cart: 0
    Quantity:
    Price:
    $8.38
    Subtotal:
  • Econo-Stitch 2.6 oz x 60" Peel Ply

    Econo-Stitch 2.6 oz x 60" Peel Ply

    AIRTECH

    $8.38
    Econo stitch peel ply is similar to Econoply E but has red tracers throughout that are a visual indicator that there is peel ply on a part.  Useful on parts that are to be bonded to make sure that the peel ply is not left on the part before bonding...
    $8.38
    Qty in Cart: 0
    Quantity:
    Price:
    $8.38
    Subtotal:
  • BleederLease B Release Coated Peel Ply

    BleederLease B Release Coated Peel Ply

    AIRTECH

    $15.56
    BleederLease B nylon peel ply is a high temperature peel ply coated with a silicone release agent to make removing the peel ply from the part easier. Bleeder Lease B is 60" wide and sold by the yard.  Full rolls are 100 yards long...
    $15.56
    Qty in Cart: 0
    Quantity:
    Price:
    $15.56
    Subtotal:
  • Ny-Ply 19 X 60" 1.9 oz. Peel Ply

    Ny-Ply 19 X 60" 1.9 oz. Peel Ply

    $12.34
    Ny-Ply 19 X 60" 1.9 oz. Peel Ply is an uncoated nylon peel ply.  Ny-ply features a tight weave that leaves very little surface texture.  Ny-ply is a tough strong fabric that resists tearing.Full rolls are 300 yards long.   Will be sold by...
    $12.34
    Qty in Cart: 0
    Quantity:
    Price:
    $12.34
    Subtotal:
  • Airweave N10 Breather x 60" Wide Airweave N10 Breather x 60" Wide

    Airweave N10 Breather x 60" Wide

    AIRTECH

    $8.64
    Airweave N10 Breather x 60" wide.Airweave N10 is a 10 oz. weight non-woven polyester breather/bleeder designed to be soft and conformable to avoid bridging.  Used in high pressure applications it can also protect against bag failure in sharp radii...
    $8.64
    Qty in Cart: 0
    Quantity:
    Price:
    $8.64
    Subtotal:
  • Airweave N4 Breather x 60" Wide Airweave N4 Breather x 60" Wide

    Airweave N4 Breather x 60" Wide

    AIRTECH

    $4.60
    Airweave N4 Breather x 60" wide.Airweave N4 is a 4 oz. weight non-woven polyester breather/bleeder designed to be soft and conformable to avoid bridging.  It also protects against bag failure in sharp radii and channels air under high pressures to...
    $4.60
    Qty in Cart: 0
    Quantity:
    Price:
    $4.60
    Subtotal:
  • Release Bag-125, .001in. X 60in Wide

    Release Bag-125, .001in. X 60in Wide

    AIRTECH

    $2.88
    Release Bag-125, .001in. X 60in Wide. Polyolefin release film compatible with epoxy, vinylester, and polyester resin systems.  Max. service temperature is 284 F.  Use to prevent sticking between breather and part or part and bag.  Also...
    $2.88
    Qty in Cart: 0
    Quantity:
    Price:
    $2.88
    Subtotal:
  • Perforated Release Bag-125, .001" x 60" Wide P3 Perferation

    Perforated Release Bag-125, .001" x 60" Wide P3 Perferation

    AIRTECH

    $4.50
    Perforated Release Bag-125, .001 in x 60 in. wide with P3 perf.  Polyolefin release film compatible with most standard resin systems (epoxy, vinylester, polyester).  Perferations allow excess resin to squeeze out of part and into breather. Max...
    $4.50
    Qty in Cart: 0
    Quantity:
    Price:
    $4.50
    Subtotal:
  • WL5200 Flourocarbon Perforated Release Film P3 Perforation

    WL5200 Flourocarbon Perforated Release Film P3 Perforation

    AIRTECH

    $16.96
    WL5200 Flourocarbon Perforated Release Film.  Flourocarbon films are designed to take temperatures up to 500F and still be strong or have high elongation.  These films are inert to most resin systems.  P3 Perf features .015" holes on...
    $16.96
    Qty in Cart: 0
    Quantity:
    Price:
    $16.96
    Subtotal:
  • Stretchlon 200 .0015 X 60in Stretch Film

    Stretchlon 200 .0015 X 60in Stretch Film

    AIRTECH

    $5.87
    Stretchlon 200 .0015 X 60in. Stretchlon vacuum bagging film is a high elongation film that is suitable for use with epoxy resins for debulk and wet-layup vacuum bagging applications.Elongates 500% to conform to most shapes.  Stock width is 60"...
    $5.87
    Qty in Cart: 0
    Quantity:
    Price:
    $5.87
    Subtotal:
  • Stretchlon 800 x 60" Roll, Stretch Film

    Stretchlon 800 x 60" Roll, Stretch Film

    AIRTECH

    $6.12
    Stretchlon 800 x 60" wide vacuum bagging film.  Stretchlon 800 is our most popular bagging film.  It features high elongation (450%) and is compatible with epoxy resins, polyester resin, and  vinylester resins. Maximum use temperature is...
    $6.12
    Qty in Cart: 0
    Quantity:
    Price:
    $6.12
    Subtotal:
  • Roll, Poly-Tube 4, 32in. Vacuum  Bagging Tube, Per Yard

    Roll, Poly-Tube 4, 32in. Vacuum Bagging Tube, Per Yard

    $2.14
    Roll, Poly-Tube 4, 32in. wide. Poly-tube 4 is a 4mil (0.004") thick tube that is 32" laid flat.  Generally used to vacuum bag core on sailboards or for other vacuum bag projects requiring the part be envelope bagged.   Will be sold by the...
    $2.14
    Qty in Cart: 0
    Quantity:
    Price:
    $2.14
    Subtotal:
  • Roll Poly-Tube 6, 30in. Vacuum Bagging Tube, Per Yard

    Roll Poly-Tube 6, 30in. Vacuum Bagging Tube, Per Yard

    $3.84
    Roll Poly-Tube 6, 30in. Tubing. Poly-Tube 6 is a polyethelyne tube with 6mil (0.006") thick walls and measures 30in. across when laid flat.  Generally used for vacuum bagging sailboards or surfboards built with sandwich skins or other vacuum bag...
    $3.84
    Qty in Cart: 0
    Quantity:
    Price:
    $3.84
    Subtotal:
  • WL 7400 36in.  Lay Flat Nylon Bagging Tube

    WL 7400 36in. Lay Flat Nylon Bagging Tube

    AIRTECH

    $5.20
    WL 7400 36in. Lay Flat Nylon Bagging film in a 36" lay flat tube.  WL7400 is a very durable nylon film that is great to use for vacuum bagging. It has an elongation of up to 400% and a service temperature of 400F.  WL7400 is compatible with...
    $5.20
    Qty in Cart: 0
    Quantity:
    Price:
    $5.20
    Subtotal:
  • WL7400 120in. Wide Center Fold Vacuum Bag Film

    WL7400 120in. Wide Center Fold Vacuum Bag Film

    AIRTECH

    $9.01
    WL7400 120in. Wide vacuum bagging film.  WL 7400 is a nylon film that has high elongation (400%) and a service temperature of 400F.  WL7400 is a durable bag that is compatible with epoxy, polyester, and vinyl ester resin systems.The WL7400 120"...
    $9.01
    Qty in Cart: 0
    Quantity:
    Price:
    $9.01
    Subtotal:
  • Roll, AT-199 Sealant Tape, Black, 50 ft long roll

    Roll, AT-199 Sealant Tape, Black, 50 ft long roll

    AIRTECH

    $11.86
    AT199 Sealant tape is a black sealant tape that comes in 50ft rolls and measures 1/16" thick x 3/8" wide.  AT199 has a service temperature of 250F. There are 40 rolls per case.
    $11.86
    Qty in Cart: 0
    Quantity:
    Price:
    $11.86
    Subtotal:
  • Total: items /

Adding your products to cart