AIRTECH
1/2" Infusion Connector RIC 12
- SKU:
- M50-0312
- Weight:
- 0.10 LBS
- Minimum Purchase:
- 1 unit
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 6 - 19 | and pay only $9.77 each |
| Buy 20 - 49 | and pay only $8.64 each |
| Buy 50 or above | and pay only $7.60 each |
Description
1/2" Infusion Connector RIC 12, use to attach vacuum ports or resin inlet lines to vacuum bag. Goes under bag and 1/2" OD hose can be inserted into it. Groove through bottom accepts 1/2" OD spiral wrap to form manifolds. Apply release before use to facilitate removing excess resin from connectors.
Related Products
Related Products
1/2" Diameter Infusion Spiral Wrap
AIRTECH
$0.67
1/2" Diameter Infusion Spiral Wrap. Use to vacuum manifolds and resin runners. 1/2" OD 3/8" ID. Can often be resused.
PRO-SET® INF-114-2 Infusion Resin
PRO-SET®
$552.07
PRO-SET INF-114-2 Infusion Resin, 4.2 Gallon (40 lb)
PRO-SET Infusion Epoxies are a low viscocity system that is sure to create lightweight high performance parts. The INF-114 custom line of...
PRO-SET® INF-114-1 Infusion Resin
PRO-SET®
$201.10
PRO-SET INF-114-1 Infusion Resin, .99 Gallon (9.3 lb)
PRO-SET Infusion Epoxies are a low viscocity system that is sure to create lightweight high performance parts. The INF-114 custom line of...
1/2" FIP x 1/4" FIP connector for 15400 and 15600
$22.42
1/2" FIP x 1/4" FIP to connect barbed fittings to the 15400 and 15600 vacuum pumps.
MTI Infusion Valve
MTI®
$6.83
One way spring and ball valve for infusion. The valve helps control resin flow into an infused part to retain optimal compaction of the laminate. It provides:
Optimal fiber volume...