AIRTECH

Airtech Resinflow 60 is a thermoplastic mesh flow media used in vacuum infusion. Often referred to as red flow or red flow media, red flow is 60" wide. Sold by the linear yard. Full rolls are...

Airtac 2 Mega is a fine mist spray adhesive, with very high tack, designed for temporary bonding. Airtac 2 Mega can be used to hold dry materials on contours and vertical surfaces. This product is...

Econo ply J is our lightest and least expensive peel ply.  Use in areas were there will be little resin build up on top of peel ply.  Econoply J is made with a polyester yarn and is...

Econo-Ply E, 2.74 oz. X 60in. wide peel ply is our most popular peel ply.  Econoply E is economical as well as being tough to not tear when removing from parts.  Econoply E is made from an...

Econo stitch peel ply is similar to Econoply E but has red tracers throughout that are a visual indicator that there is peel ply on a part.  Useful on parts that are to be bonded to make sure...

BleederLease B nylon peel ply is a high temperature peel ply coated with a silicone release agent to make removing the peel ply from the part easier. Bleeder Lease B is 60" wide and sold...

Airweave N10 Breather x 60" wide.Airweave N10 is a 10 oz. weight non-woven polyester breather/bleeder designed to be soft and conformable to avoid bridging.  Used in high pressure applications...

Airweave N4 Breather x 60" wide.Airweave N4 is a 4 oz. weight non-woven polyester breather/bleeder designed to be soft and conformable to avoid bridging.  It also protects against bag failure in...

Release Bag-125, .001in. X 60in Wide. Polyolefin release film compatible with epoxy, vinylester, and polyester resin systems.  Max. service temperature is 284 F.  Use to prevent sticking...

Perforated Release Bag-125, .001 in x 60 in. wide with P3 perf.  Polyolefin release film compatible with most standard resin systems (epoxy, vinylester, polyester).  Perferations allow...

WL5200 Flourocarbon Perforated Release Film 48 inch wide with P3 perforations.  Flourocarbon films are designed to take temperatures up to 500F and still be strong or have high elongation...

Stretchlon 200 .0015 X 60in. Stretchlon vacuum bagging film is a high elongation film that is suitable for use with epoxy resins for debulk and wet-layup vacuum bagging applications.Elongates 500% to...

Stretchlon 800 x 60" wide vacuum bagging film.  Stretchlon 800 is our most popular bagging film.  It features high elongation (450%) and is compatible with epoxy resins, polyester resin,...

WL 7400 36in. Lay Flat Nylon Bagging film in a 36" lay flat tube.  WL7400 is a very durable nylon film that is great to use for vacuum bagging. It has an elongation of up to 400% and a service...

WL7400 120in. Wide vacuum bagging film.  WL 7400 is a nylon film that has high elongation (400%) and a service temperature of 400F.  WL7400 is a durable bag that is compatible with epoxy,...

AT199 Sealant tape is a black sealant tape that comes in 50ft rolls and measures 1/16" thick x 3/8" wide.  AT199 has a service temperature of 250F. There are 40 rolls per case.

Y-204 Sealant Tape is by far our most popular vacuum bagging tape.  It features a 1/8" x 1/2" profile that makes it easy to seal small leaks and work out wrinkles.  It features a...

Y-204 Sealant Tape is by far our most popular vacuum bagging tape.  It features a 1/8" x 1/2" profile that makes it easy to seal small leaks and work out wrinkles.  It features a 400F...

401C Twist Lock Aluminum Vacuum Valve/Cup. The 401C is a simple but durable twist lock vacuum attachment cup for prepreg, clamping, and wet layup vacuum bagging operations.  Simply slide the...

AQD500 TF Quick Disconnect Male End Only. Threaded with 1/4" Female NPT.  Can be used up to 500F.

AQD500 TF Quick Disconnect Female End Only.  Threaded with 1/4" Female NPT.  Can be used up to 500F.

AQD 500 TF Quick Disconnect Assembly.  The AQD Coupler is self sealing so that when you un-join the couple both sides seal shut to maintain vacuum.  This is handy for moving parts under...

10 ft. Length Econoflow 59R Vacuum Hose.  This is a low temperature silicone vacuum hose with a steel core.  Durable and long lasting it features 1/4" Male NPT threaded ends...

1/2" Diameter Infusion Spiral Wrap.  Use to vacuum manifolds and resin runners.  1/2" OD 3/8" ID.  Can often be resused. 

NTF38, Nylon T Fittings, use to branch and splice 1/2" OD polyethylene tubing.  

1/2" Outside diameter, 3/8" Inside diameter polyethylene tubing/hose.  Use with RIC vacuum connectors and 3/8" barbed fittings.  Sold by the foot, full rolls are 100'

Green Flow 75 Infusion Flow Media 41" wide.Green Flow as it is commonly referred to is a flow media designed to efficiently distribute resin with little waste due to its low profile and tight...

1/2" Infusion Connector RIC 12, use to attach vacuum ports or resin inlet lines to vacuum bag.  Goes under bag and 1/2" OD hose can be inserted into it.  Groove through bottom...

2.5 Gallon Airtech RB 451 Resin Trap/Vacuum Reservoir. The Airtech RB-451 is designed to catch excess resin during resin infusion or closed molding processes using vacuum assistance.  The unit...

Toolwright 3 is an extruded fluoropolymer film with a pressure sensitive adhesive.  Toolwright is used to cover molds or patterns with a glossy non stick surface, this allows you to get a good...