1000 cc. Graduated Polyethylene Cup for G-100 Gun
- SKU:
- F90-5132
- Weight:
- 0.10 LBS
- Minimum Purchase:
- 1 unit
Description
1000 cc. Graduated Polyethylene Cup for G-100 Spray Gun.
Fits very securely on G-100 gelcoat gun lid, remove by blowing compressed air into nozzle of gun. Keep hand over lid and wear eye protection.
If gelcoat is mixed in other container before being put into the plastic cup it will usually remove cleanly after it cures from the cup, allowing you to re-use the cup multiple times.
Related Products
Related Products
32 oz. Paper Cup for the G-100 Spray Gun
$1.26
32 oz. Paper Cup
Fits directly onto the G-100 Spray gun, use and then dispose of. Can be used again if rim is cleaned or used immediately in subsequent batches before resin or gelcoat kicks...
100 Pack, Plastic Cup Liner for G-100 Cups
ES Manufacturing
$34.61
100 Pack, Plastic Cup Liner for G100 Cups
1000cc Graduated HD Polypropylene Measuring Cup
ES Manufacturing
$8.69
1000cc Graduated HD Polypropylene Measuring Cup
Can also be used with the G-100 Gelcoat Gun to spray gelcoat. Heavy Duty.
'O' Ring rebuild kit for the G-100 Spray Gun
ES Manufacturing
$29.15
'O' Ring rebuild kit for the G-100 Spray Gun
FN-4 Replacement Tip for G-100 Spray Gun
ES Manufacturing
$27.41
FN-4 Replacement Tip for G-100 Spray Gun
1/8" or 3.18mm Fluid Nozzle
FN-9 Tip for Model G-100 Spray Gun
ES Manufacturing
$27.41
FN-9 Tip for Model G-100 Spray Gun
9/32" or 7.14mm fluid nozzle
FN-6 Replacement Tip for G-100 Spray Gun
ES Manufacturing
$27.41
FN-6 Replacement Tip for G-100 Gel Coat Spray Gun
3/16" or 4.76mm fluid nozzle
FN-5 Replacement Tip for G-100 Spray Gun
ES Manufacturing
$27.41
FN-5 Replacement Tip for G-100 Spray Gun
5/32" or 3.97mm fluid nozzle