17 oz. X 50in, +45ø/-45ø, Double Bias Biaxial Glass
- SKU:
- C74-4237
- Weight:
- 1.50 LBS
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 3 - 15 | and pay only $7.88 each |
| Buy 16 - 120 | and pay only $7.46 each |
| Buy 121 or above | and pay only $5.95 each |
Description
17 oz. X 50in., +45/-45, Double bias, Biaxial E-glass.
Double bias e-glass knit. Suitable for use where torsional stiffness is desired or for taping up stringers or bulkheads. Bias orientation allows for good drapeability and conformibility.
All cloths will be sold by the Linear Yard - unless otherwise stated.
Additional Information
Thickness: |
0.026" or 0.66mm |
Unit of Measure: |
Yard |
Width: |
50 inch |
Fiber: |
E-Glass |
Type: |
Knit |
Nominal Weight Range: |
12 oz/yd² + |
Looking to learn some more: |
Related Products
Related Products
17 oz x 8" +45ø/-45ø Double Bias Biaxial Glass
$2.36
17 oz x 8" +45/-45 Double Bias Biaxial Glass
Double bias fabric slit down to a narrow width for taping seams and bulkheads. Great for stitch and glue boat building. Compatible with...
17 oz x 6" +45ø/-45ø Double Bias Biaxial Glass
$1.83
17 oz x 6" +45/-45 Double Bias Biaxial Glass
Double bias fabric slit down to a narrow width for taping seams and bulkheads. Great for stitch and glue boat building. Compatible with epoxy...
12 oz. X 50in., +45ø/-45ø, Double Bias E-Glass
$10.26
12 oz. X 50in., +45ø/-45ø, Double Bias E-Glass
Double bias e-glass knit. Suitable for use where torsional stiffness is desired or for taping up stringers or bulkheads. Bias orientation allows...
19.3 oz. X 50in., +45ø/-45ø Double Bias w/mat
$11.82
19.3 oz. X 50in., +45ø/-45ø Double bias with mat.
Commonly referred to as DBM1208, this knit glass reinforcement consists of a 12 oz double bias with a 3/4oz chopstrand mat stitched to it. Get...
12 oz. X 6in., +45ø/-45ø, Double Bias Glass Tape
$1.64
12 oz. X 6in., +45ø/-45ø, Double Bias Glass Tape
Double bias fabric slit down to a narrow width for taping seams and bulkheads. Great for stitch and glue boat building. Compatible with epoxy...