ConnexSUP Threaded Insert
- SKU:
- R21-0023
- Weight:
- 0.20 LBS
Description
ConnexSUP Threaded Insert (1/4"-20 brass)
Insert features a 1/4"-20 threaded brass insert for mounting accessories to your SUP, can be used with RAM mounts, camera arms, foot straps, or whatever you desire to screw to the deck of your SUP with a 1/4"-20 screw.
Related Products
Related Products
ConnexSUP Master Plug w/ Threaded Insert
$6.30
ConnexSUP Master Plug and threaded insert. Threaded insert is a smaller plug that fits inside the master plug and has a 1/4"-20 threaded insert. It can be used with RAM mount gps holders,...
ConnexSUP Camera Mount Insert
$4.50
ConnexSUP Camera Mount Insert (slotted FCS style)
Slotted insert for the ConnexSUP system. Accepts the FCS style GoPro mount (mount not included).
ConnexSUP Leash Cup/Tiedown Insert
$1.60
ConnexSUP Leash Cup or Tiedown insert. This is the insert plug only that is designed to be mounted inside the ConnexSUP Master Plug. This is a leash cup style insert that can be used to...
ConnexSUP Master Plug w/Slotted (FCS Style) Insert
$6.30
ConnexSUP Master Plug and Slotted (FCS Fin plug style) insert. This includes both the base plug and the insert plug. The slotted insert plug is typically used for mounting GoPro cameras...
ConnexSUP Installation Tool
$47.10
ConnexSUP Installation Tool
One step installation tool cuts the hole and recess for the ConnexSUP plug installation.
1in. Foot Strap Insert
Chinook Sailing Products
$1.73
1in. Footstrap Insert, Chinook Sailing Products. Plastic Plug for use with self tapping screws. To install: Drill 1" diameter hole, approx 1.25" deep and glue into board using resin putty...
2 Hole, Adjustable Foot Strap Insert
Chinook Sailing Products
$3.44
2 Hole, Adjustable Footstrap Insert. Insert accepts #10 self tapping screws.Install by routing a 1/2" wide slot into board just slightly longer than insert and approx. 1" deep. Glue insert into...
5 Hole, 4in. Adjustable Foot Strap Insert
Chinook Sailing Products
$4.07
5 Hole, 4in. Adjustable Footstrap Insert. Insert accepts #12 self tapping screws.Install by routing a 1/2" wide slot into board just slightly longer than insert and approx. 1" deep. Glue insert...
Adapter From 10 mm 1.50 to 5/8"-11 Thread
$10.38
Adapter From 10 mm 1.50 to 5/8"-11 Thread
Allows backing pads that use the 5/8"-11 Thread to be used on grinders/sanders/polishers that have a different thread.