Frequently bought together:
Description
Pint, Chemlease Sealer 15 EZ
Mold Sealer is the foundation that a good mold release system is based off of. Using a mold sealer will help reduce microscopic porosity and provide a better surface to release from. This is especially critical when doing closed molding over plug surfaces or temporary molds.
Chemlease 15 can be applied with by wiping or spraying and most molds will require just one or two coats before applying release agent.
Mold Sealer is the foundation that a good mold release system is based off of. Using a mold sealer will help reduce microscopic porosity and provide a better surface to release from. This is especially critical when doing closed molding over plug surfaces or temporary molds.
Chemlease 15 can be applied with by wiping or spraying and most molds will require just one or two coats before applying release agent.
Related Products
Related Products
Gallon, Chemlease Sealer 15 EZ
Chemtrend
$479.93
Gallon, Chemlease Sealer 15 EZ
Mold Sealer is the foundation that a good mold release system is based off of. Using a mold sealer will help reduce microscopic porosity and provide a better...
N17-0015
Pint Mold Cleaner EZ ChemLease
Chemtrend
$55.39
Pint Mold Cleaner EZ ChemLease
Solvent based mold cleaner for removing mold release.
N17-0198
Pint, Surfboard Sealer
$13.92
Pint, Surfboard Sealer
Surfboard Sealer is a water based acrylic coating that you apply to a surfboard by wiping on thin coats with a foam brush. Used to seal the sanded surfboard from dirt...
R40-7092
Chemlease 70-90 Pint Semi-Permanent Mold Release
Chemtrend
$53.10
Pint, Chemlease 70-90 Semi-permanent mold release
Chemlease 70-90 is a unique mold release designed for the polyester molding industry. It is a high slip release primarily for closed molding...
N17-0088