WEST SYSTEM®
WEST SYSTEM® 875 Scarffer
- SKU:
- G73-6591
- MPN:
- 875
- Weight:
- 3.00 LBS
- Minimum Purchase:
- 1 unit
Description
The Scarffer is a unique tool designed by boatbuilders for cutting accurate scarf joints in plywood up to 3/8″ thick. It attaches easily to most circular saws and is easily removed. The saw must have a base plate extension (outside of the blade) ½” or wider.
SAW NOT INCLUDED
Related Products
Related Products
WEST SYSTEM® Roller Pan
WEST SYSTEM®
$9.37
WEST SYSTEM's heavy duty, flexible plastic roller pan allows you to “pop out” epoxy after it has cured so the pan can be re-used. Eliminates the need for liners when working with epoxy...
WEST SYSTEM® 3" Roller Frame
WEST SYSTEM®
$9.23
WEST SYSTEM® 3" wide caged roller frame holds 7" full-width roller covers and roller covers that have been cut to narrower widths.
WEST SYSTEM® 423 Graphite Powder
WEST SYSTEM®
$35.29
423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy/graphite is commonly used as...
WEST SYSTEM® Lab Coat, XL
WEST SYSTEM®
$9.36
(XL) WEST SYSTEM Lab Coat.
For upper body protection, use the lab coats with gloves to prevent accidental skin and clothing contact with uncured epoxy. Made out of a microporous film laminate...
WEST SYSTEM® 809 Notched Spreader
WEST SYSTEM®
$1.82
WEST SYSTEM® Notched Spreader.
Stiff 4″ x 4″ plastic spreader with 1/8″, 3/16″ and 1/4″ notches on three sides for quickly applying thickened epoxy at a constant rate over large areas. Thin,...