Connex SUP Master Plug
- SKU:
- R21-0009
- Weight:
- 0.10 LBS
- Minimum Purchase:
- 1 unit
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 100 or above | and pay only $1.80 each |
Frequently bought together:
Description
ConnexSUP is a system for attaching equipment and gear to your stand up paddleboard. It consists of a base plug that is mounted into the board and then other plugs are inserted into that for various attachement types. The three types of attachements are: leash cup or tie down style attachement, FCS fin plug slot attachement (for GoPro mounts), and 1/4"-20 threaded insert for attaching equipment with a screw.
This part is the master plug or the base plug that the other three(sold seperately) fit into.
Installation is typically done with a special holesaw bit that grinds the recess for the flange of the plug, then the plug is set in a resin putty.
This part is the master plug or the base plug that the other three(sold seperately) fit into.
Installation is typically done with a special holesaw bit that grinds the recess for the flange of the plug, then the plug is set in a resin putty.
Related Products
Related Products
Connex Master Plug with standard tiedown
$4.00
ConnexSUP Master Plug with standard tie down/leash cup insert.
This is the ConnexSUP plug body, that will accept the other inserts, FCS style GoPro Mount, and 1/4"-20 Threaded Insert. Comes...
R21-0004
ConnexSUP Master Plug w/ Threaded Insert
$6.30
ConnexSUP Master Plug and threaded insert. Threaded insert is a smaller plug that fits inside the master plug and has a 1/4"-20 threaded insert. It can be used with RAM mount gps holders,...
R21-0006
ConnexSUP Master Plug w/Slotted (FCS Style) Insert
$6.30
ConnexSUP Master Plug and Slotted (FCS Fin plug style) insert. This includes both the base plug and the insert plug. The slotted insert plug is typically used for mounting GoPro cameras...
R21-0005
12'6" SUP Hotwired EPS SUP Blank
US Blanks
$328.53
12'6" SUP Hotwired EPS SUP Blank
Bottom Length: 12'7-1/2"
Max. Width: 32"
P88-EPS-1206
ConnexSUP Threaded Insert
$4.50
ConnexSUP Threaded Insert (1/4"-20 brass)
Insert features a 1/4"-20 threaded brass insert for mounting accessories to your SUP, can be used with RAM mounts, camera arms, foot straps, or whatever you...
R21-0023