AIRTECH
Green Flow 75 Infusion Flow Media x 41" wide
- SKU:
- M50-0175
- Weight:
- 0.20 LBS
- Minimum Purchase:
- 1 unit
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 4 - 15 | and pay only $4.77 each |
| Buy 16 - 115 | and pay only $3.90 each |
| Buy 116 or above | and pay only $2.91 each |
Description
Green Flow 75 Infusion Flow Media 41" wide.
Green Flow as it is commonly referred to is a flow media designed to efficiently distribute resin with little waste due to its low profile and tight construction. Greenflow is compatible with polyester, vinylester, and epoxy resins. Sold by the yard or in full rolls. A full roll is 350' long approx. 117 yards.
Green Flow as it is commonly referred to is a flow media designed to efficiently distribute resin with little waste due to its low profile and tight construction. Greenflow is compatible with polyester, vinylester, and epoxy resins. Sold by the yard or in full rolls. A full roll is 350' long approx. 117 yards.
Related Products
Related Products
Enkafusion CX1000 4mm x 4in wide Flow Media
ENKA®
$1.32
Enkafusion CX1000 4mm x 4in wide infusion flow media tape.Enkafusion is often used to make resin infusion feed lines. It is a thermoplastic filament mesh encased in a sleeve that provides a...
Resinflow 60 Red Flow Media
AIRTECH
$9.66
Airtech Resinflow 60 is a thermoplastic mesh flow media used in vacuum infusion. Often referred to as red flow or red flow media, red flow is 60" wide. Sold by the linear yard. Full rolls are...
Cushion Flow Loose Fill 14 Cubic Ft. Bag
$27.64
Cushion Flow Loose Fill 14 Cubic Ft. Bag of Packing Peanuts
MTI Infusion Valve
MTI®
$6.83
One way spring and ball valve for infusion. The valve helps control resin flow into an infused part to retain optimal compaction of the laminate. It provides:
Optimal fiber volume...
Membrane Infusion Hose
MTI®
$2.74
Membrane covered hose for creating the outgoing vacuum line for resin infusion projects. Goretex type membrane allows air to flow through hose to vacuum while keeping resin out of the line...