MTI®
MTI Infusion Valve
- SKU:
- M50-0250
- Weight:
- 0.05 LBS
- Minimum Purchase:
- 1 unit
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
| Buy 10 or above | and pay only $4.74 each |
Description
One way spring and ball valve for infusion. The valve helps control resin flow into an infused part to retain optimal compaction of the laminate. It provides:
- Optimal fiber volume fraction
- Less room for failures in setting up the process
- Enhanced process reliability
Related Products
Related Products
Membrane Infusion Hose
MTI®
$2.74
Membrane covered hose for creating the outgoing vacuum line for resin infusion projects. Goretex type membrane allows air to flow through hose to vacuum while keeping resin out of the line...
M50-0100
1/2" Diameter Infusion Spiral Wrap
AIRTECH
$0.67
1/2" Diameter Infusion Spiral Wrap. Use to vacuum manifolds and resin runners. 1/2" OD 3/8" ID. Can often be resused.
M50-0010
1/2" Infusion Connector RIC 12
AIRTECH
$10.42
1/2" Infusion Connector RIC 12, use to attach vacuum ports or resin inlet lines to vacuum bag. Goes under bag and 1/2" OD hose can be inserted into it. Groove through bottom accepts 1/2"...
M50-0312
3mm Core Mat Soric SF Infusion 50"
$37.67
3mm Lantor Soric® SF x 50" for use with Infusion and other closed mold processes, Sold by the yard, Full roll length is 54.67 yards
Soric® SF is a general-purpose grade for thin laminates. This...
L78-4570
PRO-SET® INF-114-2 Infusion Resin
PRO-SET®
$552.07
PRO-SET INF-114-2 Infusion Resin, 4.2 Gallon (40 lb)
PRO-SET Infusion Epoxies are a low viscocity system that is sure to create lightweight high performance parts. The INF-114 custom line of...
G74-2604